STOP LOSING ARGON

THE ARGON HERO

 Reduce Argon losses when filling Orca (micro bulk) trucks from bulk tanks.

Argon is rare, valuable, and frequently in short supply. A normal Liquid Argon fill can result in losses up to 30% due to flash loss. The new ARGON HERO system reduces and can even eliminate Argon loss, while reducing fill time and increasing payload.    

ARGON HERO - HOW IT WORKS

 

Screen Shot 2021-04-28 at 4.22.16 PM

SYSTEM INCLUDES:
        • Skid base unit with all control valves, pressure transmitters, relief valves and piping pre-mounted.
        • Counter flow heat exchanger ASME coded vessel.
        • UL Listed Electrical Control Enclosure with 7" touchscreen with NEMA Type 4 Latch Cover
        • Exclusive automation to control and monitor Argon and Nitrogen saturation pressure/temperatures during the filling process.
        • An option to use Argon gas phase to fill through Argon HERO to reduce tank pressure is also available.

Argon Hero_IMG_0855 2Argon Hero 3D rendering VIEW 1
 
Argon Hero 3D rendering VIEW 3  Argon Hero 3D rendering VIEW 2  Argon Hero 3D rendering VIEW 4
 
bonus features:
        • System can be remote monitored and supported
        • All units are built and tested at Weldcoa prior to shipping to the customer work site. This assures that the unit is fully operational upon receipt. The units are highly adaptable to various environments and reside within a NEMA enclosure.
        • Delivered as self contained, turn key units that are ready to operate once the existing gas lines have been connected to them
        • Built, Programmed and Tested in the USA

Click Here TO DOWNLOAD FLYER

 

THERE IS A SIGNIFICANT ADDED VALUE WHEN TRUSTING WELDCOA

LEADING, PROVEN TECHNOLOGY:

Weldcoa constantly reviews new products on the markets that could enhance our systems.  For that reason our systems are always current state-of-the-art.  Our automation staff is all in-house and with 20+ years of systems in operation, the staff is very knowledgeable on overall cylinder filling plant operations.  So with this understanding the logic that is built into each system is very thorough. 

It is like someone, who fully understands the ins and outs of cylinder filling, is standing there and operating the system.  Which is exactly what is happening.  Weldcoa has a number of engineers on staff who have worked in fill plants for the major gas companies.   They have worked with our automation programmers to ensure that this logic is built into the system.

It is easy for anyone to say they offer automation.  However, you really need to look at what you are actually getting and understand what the automation will do for you.  This can have a tremendous impact on the efficiency of the system. 

Argon Hero_IMG_0866-preview

SECURITY:

Because many companies have a concern with an outside company having access to the computer system for the automation, Weldcoa has recently come up with a solution.  This system provides Weldcoa remote access without going through any of the company’s channels or systems.  Thus security is guaranteed and companies can be assured of no breaches into their systems. 

 ELECTRICAL:

All electrical control panels for our systems are made in-house with a UL listed shop.  All automation is fully tested and proven prior to shipment.  Electrical schematic wiring drawings are provided for the local electrical contractor and a meeting is held with the contractor prior to the installation.  All final wire connections are inspected by our electrical engineer to ensure proper installation.  These steps greatly minimize any start-up and operational issues with the system which is another cost savings.

Wayne wiring_640360pixels

MECHANICAL:

Our Argon Hero Systems are pre-assembled in our shop including mechanically and electrically.   They are operationally tested prior to shipment and then prepared for shipping.  All piping is cleaned and capped at one end of the system for ease of piping in the field.  The ease of installation dramatically cuts down the costs of the installation.

VIDEO FROM a RECENT INSTALL:

ARGON HERO IN ACTION_IMG_0868-1
The LIQUID Argon is in a closed loop system. Liquid Nitrogen is used to sub-cool the ARGON and aid in dropping the pressures to the desired automated settings. the nitrogen is what you see venting in the videos.
Argon Hero_IMG_0855 2

PUT YOUR TRUST IN WELDCOA

There are many reasons why to choose a Weldcoa automated Argon HERO.  The primary reason though is that they work and perform.  We have a long, proven track record of successful systems and satisfied clients. 

Our solutions are designed and built to exceed your expectations. We work closely with you and will manage your project from start to finish. Weldcoa has decades of experience in successfully helping businesses, just like yours, transition from what was to what will be. 

WE ARE WITH YOU EVERY STEP OF THE WAY

Weldcoa is a true U.S. manufacturer with the people, equipment and experience necessary to design, manufacture and test a wide range of products and automation for compressed gas, cryogenic liquids and supercritcal CO2. Our elite team of engineers, programmers and support staff are heavily involved in every detail of our products from research and development to installation and start-up and training. Often, the team that designs your solutions is the very same team who installs and provides the long-term support for the equipment. Everyone at Weldcoa is focused on providing you with the highest possible level of service and support. If you are interested in discussing your project and/or application with us, please contact us at (630) 806-2000 or email our team at solutions@weldcoa.com today. We would be happy to hear from you!

Argon Hero_IMG_8323

Weldcoa only succeeds when you do

We want to partner with you, providing real long-term value.