Available Control Panel Options
This is the area the operator will operate the valves and read the gauges. Typically a control panel is integrated on a steel powder-coated frame however the control panel can be sold without a frame if requested. All control panels are made and engineered at Weldcoa.
- Single Gas; Simplex (One-Sided) or Duplex (Two-Sided)
- Mix Gas; Simplex (One-Sided) or Duplex (Two-Sided)
- The entire manifold assembly is 100% hydrostatically pressure tested to 1.5 times the MAWP, 100% nitrogen leak tested, 100% oxygen cleaned, dried, bagged to the highest safety standards.
- Made in the USA
Fill Rack, Manifold and Lead Options
There are multiple variations of fill racks available depending on if they are against the wall, or located in an open area in a fill plant. The fill racks can be single sided or double sided to fit your specific needs. All fill racks are made and engineered at Weldcoa.
- Single Sided or Double Sided Styles Available
- A Wide, Wide Variety of Cylinder Qty. Per Manifold and Frame Options Available
- Various Pressure Ratings Available Dependent Upon Manifold Material of Construction
- Individual Isolation Valves Are Standard Per Drop
- A Wide Variety of CGA Connections and Leads Available
- The entire manifold assembly, including the leads, are 100% hydrostatically pressure tested to 1.5 times the MAWP, 100% nitrogen leak tested, 100% oxygen cleaned, dried, bagged to the highest safety standards.
- Made in the USA
Additional Accessories Available
- Bank Filling Options, including rack, manifold, and lead/pigtails options
- Vacuum Pump and Interconnected Piping
- Fold Down Shelf Units for Small Cylinders
- Remote Fill Racks Stationed Away From the Control Panel
have a special application?
For any questions on what is offered or if you have a specialty application, please feel free to contact us at (630) 806-2000 or email us at solutions@weldcoa.com.
