LowPro Manifold and leads

• 6 and 12 cylinder manifold header options available in Brass, Stainless Steel and Monel 400 
• Manifolds are available as a stand-alone item or with either permanent or replaceable rigid or flexible leads.
• Additional options such as Block Manifolds or Replaceable Leads are also available
• Weldcoa's proprietary post-sintering process follows aerospace techniques which provide the lowest possible effusion rate, the highest flex life and the widest temperature range of any fluoropolymer available. 
• Post-sintering reduces effusion. It provides the lowest effusion rate possible while maintaining the highest flexibility and most robust inner core. This is accomplished during the re-heating process when molecular voids between the PTFE chains are closed even further, making the PTFE more “dense”. By making these voids as small as possible it closes the path a gas will follow while under pressure.
• Every manifold assembly, including the leads, are 100% hydrostatically pressure tested to 1.5 times the MAWP and then 100% nitrogen leak tested.
• Following the pressure test, each assembly is 100% oxygen cleaned, dried, bagged to the highest safety standards including CGA's 4.1 requirements.
• All Weldcoa's LowPro flexible lead assemblies meet CGA E-9 Section 4.1.6 Effusion Requirements as well
• Minimum Burst is Four Times Maximum Allowable Working Pressure
• All of Weldcoa's non-metallic lines flexbile leads are manufactured using a true PTFE post-sintered innercore.

• Weldcoa is now post-sintering PTFE innercore tubing for flexible leads and the focus is strictly on the high pressure gas market. Made to Weldcoa’s strict quality specifications.

• Weldcoa post-sintered flexible leads have passed several difficult levels of testing either by an independent lab or internally in each stage of production.
• Adiabatic Testing/Surge Testing has just been completed at NASA White Sands Test facility by Jacobs Technology.
• All Manifolds and Leads are Made in the USA

want to reduce your product loss? learn about the benefits of PTfe post-sintered innercore

• Economically priced
• Lowest effusion rate providing the lowest amount of lost gas in service
• Wildest temperature range
• Highest flexibility
• Longest service life
• Meets and exceeds CGA E-9 sec 5.7

popular 6 cylinder manifold options

lm06b-cpbp-b540

LowPro Manifold, 6 Cylinder Brass Header, Rigid Copper Leads, CGA 540, with Standard Valve.

lm06b-cpbp-b580

LowPro Manifold, 6 Cylinder Brass Header, Rigid Copper Leads, CGA 580, with Standard Valve.

lm06b-FDbp-b540

LowPro Manifold, 6 Cylinder Brass Header, Flexible Double Braided Post-Sintered Teflon Lined Leads MAWP 3,600 PSI, CGA 540, with Standard Valve.

lm06b-FDbp-b580

LowPro Manifold, 6 Cylinder Brass Header, Flexible Double Braided Post-Sintered Teflon Lined Leads MAWP 3,600 PSI, CGA 580, with Standard Valve.

lm06b-ssbp-b350

LowPro Manifold, 6 Cylinder Brass Header, Rigid Stainless Steel Leads, CGA 350, with Standard Valve.

lm06b-ssbp-b580

LowPro Manifold, 6 Cylinder Brass Header, Rigid Stainless Steel Leads, CGA 580, with Standard Valve.

popular 12 cylinder manifold options

lm12b-cpbp-b540

LowPro Manifold, 12 Cylinder Brass Header, Rigid Copper Leads, CGA 540, with Standard Valve.

lm12b-cpbp-b580

LowPro Manifold, 12 Cylinder Brass Header, Rigid Copper Leads, CGA 580, with Standard Valve.

lm12b-FDbp-b540

LowPro Manifold, 12 Cylinder Brass Header, Flexible Double Braided Post-Sintered Teflon Lined Leads MAWP 3,600 PSI, CGA 540, with Standard Valve.

lm12b-FDbp-b580

LowPro Manifold, 12 Cylinder Brass Header, Flexible Double Braided Post-Sintered Teflon Lined Leads MAWP 3,600 PSI, CGA 580, with Standard Valve.

lm12b-ssbp-b350

LowPro Manifold, 12 Cylinder Brass Header, Rigid Stainless Steel Leads, CGA 350, with Standard Valve.

lm12b-ssbp-b580

LowPro Manifold, 12 Cylinder Brass Header, Rigid Stainless Steel Leads, CGA 580, with Standard Valve.