Good Solution for Greater Stability

Designed with a wider base providing a very low center of gravity

DETAILS THAT MAKE A DIFFERENCE

High Quality Product, Proudly Made in the USA

OVERHEAD CAPABILITIES

Compliant with DOT Guidelines

Request a Quote

POPULAR CART OPTIONS (Manifolds Sold Separately)

LCU06-APC

LowPro Ultra Series, 6 Cylinder, A Base for 8.75" - 9.5" OD Cylinders, Phenolic Wheels with an Industrial Brake. 

LCU06-BPC

LowPro Ultra Series, 6 Cylinder, B Base for 9.5" - 10" OD Cylinders, Phenolic Wheels with an Industrial Brake. 

LCU06-CPC

LowPro Ultra Series, 6 Cylinder, C Base for 10" - 10.5" OD Cylinders, Phenolic Wheels with an Industrial Brake. 

LCU06-DPC

LowPro Ultra Series, 6 Cylinder, D Base for 10.5" - 11" OD Cylinders, Phenolic Wheels with an Industrial Brake. 

POPULAR MANIFOLD OPTIONS

LM06B-CPBP-B540

LowPro Series Manifold, 6 Cylinder Brass Header, Rigid Copper Leads, CGA 540, with Standard Valve.

LM06B-CPBP-B580

LowPro Series Manifold, 6 Cylinder Brass Header, Rigid Copper Leads, CGA 580, with Standard Valve.

LM06B-FDBP-B540

LowPro Series Manifold, 6 Cylinder Brass Header, Flexible Double Braided Post-Sintered Teflon Lined Leads MAWP 3,600 PSI, CGA 540, with Standard Valve. 

LM06B-FDBP-B580

LowPro Series Manifold, 6 Cylinder Brass Header, Flexible Double Braided Post-Sintered Teflon Lined Leads MAWP 3,600 PSI, CGA 580, with Standard Valve.

 

Manifold Options Available

LowPro Ultra Series

The LowPro Ultra is designed with a wider base providing a very low center of gravity and shortened overall height. From top to bottom, the cart is only 6’ 1⁄4” tall. This is a good solution for those who want greater stability during transit. Compliant with DOT guidelines.

 

LowPro_LogoGreen.gif

GAIN GREATER STABILITY DURING TRANSIT 

  • Standard cart design includes a preformed, lasered “A” size base accommodating 8.75” to 9.5” OD cylinders. “B”, “C” and “D” size bases are available upon request for larger OD cylinder needs.
  • Additional options such as D-Rings, Roll Bar, Baffles, Secondary Clamp, Steering Handles and Brakes on Swivels are also available upon request.
  • Entire cart frame is professionally powder coated to protect from wear, corrosion, impact, and weather.
  • Galvanizing is an available option for high corrosive environments.
  • Compliant with DOT Guidelines

Features and Benefits

  • Comes standard with four phenolic wheels (two fixed and two rotating), allowing the cart to easily be maneuvered and pivoted in multiple directions with ease.

  • Can be fork lifter, craned or rolled.
  • The lasered cut and press brake formed hood on the top of the gas pack provides overhead protection to the cylinders, leads, valves and manifolds from either a crane or a forklift during transit.

  • A crane lifting eye is incorporated into the upright structural tubing

  • Sturdy exterior frame with cylinder clamp design made specifically to reduce potential cylinder rotation, stress and/or vibration inflicted onto the leads attached to the cylinders in the carts during transit.
  • Adjustable manifold bracket can be positioned up or down accommodating different cylinder heights and has also been redesigned to universally accommodate most Weldcoa manifolds including Block, Brass, Stainless Steel and Monel 400 models with Rigid or Flexible Leads.

  • Available with or without a manifold assembly
  • The entire manifold assembly, including the leads, are 100% hydrostatically pressure tested to 1.5 times the MAWP, 100% nitrogen leak tested, 100% oxygen cleaned, dried, bagged to the highest safety standards.
  • Made in the USA

What to expect from Weldcoa

All Weldcoa Gas Packs are fully built 100% at Weldcoa. If a manifold assembly is included, they are tested, oxygen cleaned, bagged and tagged. Weldcoa guarantees all of our structures to be free of manufacturing defects for life.

For any questions on what is offered or if you have a specialty application, please feel free to contact us at (630) 806-2000 or email us at solutions@weldcoa.com.

 

Contact Us

_DSC2708.jpg
chat-bubbles.png

Deep Industry Experience

From the most basic to the most demanding, we have the products, experience and staff that will support you and your customer’s needs better than anyone in the specialty gas industry.
screwdriver-and-wrench-crossed.png

Weldcoa is a true USA Manufacturer

We are proud to say all of our specialty gas equipment is engineered, designed, programmed, fabricated, wired, assembled and thoroughly tested at our Aurora, Illinois USA facility. 
rankings.png

Top Quality Products and Staff

Weldcoa continually strives to exceed their customers’ expectations. With our vast amount of experience involved with the litany of documentation required, as well as our unmatched depth of knowledge and technical expertise, it will become quite clear that Weldcoa is the partner you are looking for.